Ready-to-connect system including pre-treatment for desalination of drinking water according to drinking water regulations (free chlorine not detectable).
Due to integrated water pre-treatment components such as pre-filter, backflow preventer, duplex water softener and limitron hardness monitoring unit a piping on site is not necessary. Only 4 connections required (drinking water, permeate, waste water and mains connection). Continuous production of permeate possible.
Up to 30% energy savings due to high pressure pump with frequency converter (FU) with control of permeate flow rate at constant value (PKR). Particularly quiet operation.
D365 item number | 18231000053 |
Item number | 5110010202 |
Width | 1935 mm |
Height | 2000 mm |
Depth | 810 mm |
Length | |
Weight | 525 kg |
Valve | |
Vessel | |
Resin | |
Type Filter Media | |
Volume Filter Media | |
Exchange Capacity | |
Salt Consumption | |
Water Consumption | |
Flows | |
Permeate Flow | 2000 l/h |
Membranes | 4040 x 6 |
Controller | RO digital |
Recovery | 75 - 80 % |
Max Operating Pressure | 14 bar |
Feedwater Connection | 1" IG |
Permeate/Concentrate Connection | DN20 |
Voltage | 3 x 400V / 50Hz |
Motor Power | 4 Kw |
Minimal Salt Rejection | 97 % |
Pre-fusing | 20 A |
Conductivity Range | 1 - 999 µS/cm |
Feedwater Pressure | min./max. 4/6 bar |
Feedwater Temperature | min./max. 5/35 °c |
Ambient Temperature | Max. 40°c |
pH Range | 3 - 11 |
Waste Water Connection | HT 100 |
Capacity of softener | 400 °dH x m³ |
Max. Raw Water Hardness In Continuous Operation | 24 °dH |
Advantages |
Advantages of the FU CD version:
|
Footnotes |
The unit is designed for a maximum TDS of 1,000 mg/l, a water temperature of 15°C, a maximum colloidal index of 3 and free permeate outlet. Under these conditions, the unit still reaches design permeate flow after three years of operation. The permeate recovery depends on the raw water quality and the type of pretreatment. |
We offer a speedy delivery of a wide range of quality products, from our extensive stock, at competitive prices.
We support our customers with detailed technical back up to help you to choose the right product for each application.
We are trade suppliers only and do not supply to end users.
We offer good quality products at competitive prices.