UO Budget 130 with conductivity meter
Undersink unit for desalination of softened drinking water according to drinking water regulations (free chlorine not detectable). Drinking water can also be desalinated without pre-treatment. However, in this case the recovery rate is reduced. The decisive factor is the water analysis.
| Features |
|
| Options |
Conductivity measurement permeate |
| Footnotes |
The units are designed for a maximum TDS of 1,000 mg/l, a water temperature of 15°C, a max. colloidal index of 3 and free permeate outlet. Under these conditions, the unit still reaches design permeate flow after 3 years of operation. The permeate recovery depends on the raw water quality and the type of pre-treatment. |
| Width | 800 mm |
| Height | 360 mm |
| Depth | 360 mm |
| Length | |
| Weight | 31 kg |
| Valve | |
| Vessel | |
| Resin | |
| Type Filter Media | |
| Volume Filter Media | |
| Exchange Capacity | |
| Salt Consumption | |
| Water Consumption | |
| Flows | |
| Permeate Flow | 130 l/h |
| Membranes | 4021 x 1 |
| Controller | RO 524 |
| Recovery | 50 % |
| Max Operating Pressure | 10 bar |
| Feedwater Connection | R 3/4" AG |
| Permeate/Concentrate Connection | DN10 |
| Voltage | 230V / 50Hz |
| Motor Power | 0.4 Kw |
| Minimal Salt Rejection | 95 % |
| Pre-fusing | 16 A |
| Conductivity Range | 1 - 99 μS/cm |
| Feedwater Pressure | min./max. 3/6 bar |
| Feedwater Temperature | min./max. 5/35 °c |
| Ambient Temperature | Max. 40°c |
| pH Range | 3 - 11 |
Speedy Delivery
We offer a speedy delivery of a wide range of quality products, from our extensive stock, at competitive prices.
Support
We support our customers with detailed technical back up to help you to choose the right product for each application.
B2B
We are trade suppliers only and do not supply to end users.
Top Quality
We offer good quality products at competitive prices.
