Undersink unit for desalination of softened drinking water according to drinking water regulations (free chlorine not detectable). Drinking water can also be desalinated without pre-treatment. However, in this case the recovery rate is reduced. The decisive factor is the water analysis.
D365 item number | 18231000068 |
Item number | 5110019725 |
Width | 800 mm |
Height | 360 mm |
Depth | 360 mm |
Length | |
Weight | 31 kg |
Valve | |
Vessel | |
Resin | |
Type Filter Media | |
Volume Filter Media | |
Exchange Capacity | |
Salt Consumption | |
Water Consumption | |
Flows | |
Permeate Flow | 130 l/h |
Membranes | 4021 x 1 |
Controller | RO 524 |
Recovery | 50 % |
Max Operating Pressure | 10 bar |
Feedwater Connection | R 3/4" AG |
Permeate/Concentrate Connection | DN10 |
Voltage | 230V / 50Hz |
Motor Power | 0.4 Kw |
Minimal Salt Rejection | 95 % |
Pre-fusing | 16 A |
Conductivity Range | 1 - 99 μS/cm |
Feedwater Pressure | min./max. 3/6 bar |
Feedwater Temperature | min./max. 5/35 °c |
Ambient Temperature | Max. 40°c |
pH Range | 3 - 11 |
Features |
|
Options |
Conductivity measurement permeate |
Footnotes |
The units are designed for a maximum TDS of 1,000 mg/l, a water temperature of 15°C, a max. colloidal index of 3 and free permeate outlet. Under these conditions, the unit still reaches design permeate flow after 3 years of operation. The permeate recovery depends on the raw water quality and the type of pre-treatment. |
We offer a speedy delivery of a wide range of quality products, from our extensive stock, at competitive prices.
We support our customers with detailed technical back up to help you to choose the right product for each application.
We are trade suppliers only and do not supply to end users.
We offer good quality products at competitive prices.